Regulatory, Cultural and Ethical Dimensions to the Introduction of Essay

Regulatory, Cultural and Ethical Dimensions to the Introduction of International Accounting Standards - Essay Example According to the research findings companies are often placed under regulations with respect to international accounting standards to enable the accounting professionals to provide an honest and accurate financial image to company’s stakeholders. Through compliance with international accounting standards regulations, companies are bound to benefit from their investors’ confidence with regards to truthful and accurate reporting of the financial situation and performance of the company. More so, compliance to such standards would render financial information more understandable, reliable, comparable, and relevant among the users of financial information in assessing confidence in company management and making economic decisions. Regulatory dimensions of international accounting standards are subject to a two tier endorsement mechanism standards a technical and regulatory level. The regulatory level endorsement mechanism is based on proposals of local accounting commission s that decide on the levels and whether the International Accounting Standards are to be adopted. Local regulatory bodies aim to ensure that full accountability and transparency is achieved in financial reporting through both local regulations and compliance to International Accounting Standards. Countries and regions such as the European Union have enforced compliance regulations among its publicly listed companies to apply International Accounting Standards in preparation of their financial statements. ... The regulatory level endorsement mechanism is based on proposals of local accounting commissions that decide on the levels and whether the International Accounting Standards are to be adopted. Local regulatory bodies aim to ensure that full accountability and transparency is achieved in financial reporting through both local regulations and compliance to International Accounting Standards. Countries and regions such as the European Union have enforced compliance regulations among its publicly listed companies to apply International Accounting Standards in preparation of their financial statements. This is in a bid to improve transparency and foster efficiency in corporate functions in the interest of the public and more particularly, investors (Palea, 2006, p.7). On the other hand, technical level endorsement mechanism uses Accounting Technical Committees and advisory bodies made up of accounting professionals and experts from both public and private sectors. These professional accou ntants committees and advisory bodies seek to provide expertise and support that is needed to assess International Accounting Standards and to advise companies on whether or not it is suitable for them to adopt the standards according to local and country preferences and interests. However, there exist Generally Accepted Accounting Principles that encompass a wide spectrum of local and geographically dispersed accounting interests and preferences all over the world. The GAAP is a common set of accounting standards, principles and procedures that are globally applicable by companies in compiling their financial statements. More so, GAAP include a combination of commonly accepted practices and local board authoritative policies and standards of reporting

Marketing Strategy for Coca-Cola Essay Example | Topics and Well Written Essays - 2250 words

Marketing Strategy for Coca-Cola - Essay Example This means that a rethink of the strategies of yesteryears was the main focus so as to remain strong despite the competition. Discussion The major focus was on how consumers choose what to buy so that the company could use the information to customize the products so that they conform to the needs of these customers. There are a myriad of reasons that drive consumption that are going to be assessed in this paper. Marketers generally concede that the most difficult thing to analyze is what drives specific customers to make specific purchases (Thackston, 2005). There are two major reasons that drive these purchases. The first is for personal reasons whereas the second is mostly on external factors in the business market. Perhaps the greatest influence of consumer behavior is how the products are perceived. The perception filter is the conscious and subconscious view of the products drawn from the information sourced from a myriad of stimuli. The process of filtering perception is four- stepped. The first thing is exposure to the stimuli, followed by attention to the stimuli, third is the awareness of the stimuli and finally, there is the retention of the tenets of the stimuli (Christ, 2011). All the steps are generally pegged on how people learn as this is diverse. The Coca-Cola Company is a multinational company that has the services of the best marketers at its disposal. These marketers therefore know how to affect the perception of their brands in the eyes of the consumer. The use of advertisements is the major tool of influencing these perceptions although it is also very difficult since there is advertisement clutter in the media. Creativity is therefore of essence and the message must be captivating to arouse interest. Basically, the message of the advertisement must be precise so that it is not decoded negatively in people and also must be positively interpreted. The second factor affecting how consumers purchase products is their attitudes towards the prod ucts (Christ, 2011). This generally points to how people feel about the product as well as the company. For one to have an attitude there must be an element of conviction on the information possessed. Therefore, changing negative attitudes take a lot of effort. The company marketers must be focused on the contributors to the negative attitudes. This requires that the process be very involving so that negative sentiments are aired. In the same instance, it is fundamental that the Coca-Cola Company analyzes why some consumers have positive attitudes towards the competitor’s products so as to try and lure them by reflecting the strengths they see in those products. Thirdly, consumer purchases are influenced by the knowledge that they possess (Christ, 2011). This is the sum of all the experiences and information that consumers possess. Knowledge is also largely dependent on how the consumer perceives the world. The Coca-Cola Company has to use a large number of researches so as t o gauge what the consumers know about their products. When crafting campaigns to market their products, it is important to aim at correcting the wrong knowledge that may be possessed as well as educate consumers on the products. Other internal influences that the Coca-Cola Company should be aware of include the personalities of their customers, their lifestyles, their role in the society they live in and also what motivates them. All of these are important as they aid in

Quiz 4 Assignment Example | Topics and Well Written Essays - 250 words - 1

Quiz 4 - Assignment Example Nixon (1974) outcome was influenced by then President Richard Nixon who authoritatively and defiantly interfered with the investigation process regarding the controversies surrounding the Democratic Party (Greenburg 58). Besides, the implementation of court policies is influenced by the Congress. As a supreme organ, Congress has a lot of say on exactly how judicial policies can be implemented in the country. However, this might at times go against the interpretation of the lower courts (Abraham 397). Lastly, the implementation of court decisions is influenced by the discretion of the lower courts. Since it is the Supreme Court that make decisions, their interpretations are always left for the lower courts. This does not effectively work because most of the decisions are vague and might not be properly interpreted by the judges of the lower courts. According to the US constitution, judiciary should be an independent institution. Meaning, it is free to discharge its duties without an unnecessary influence from any person or organ of the government (Beard 71). However, there are several occasions in which the judiciary has suffered retaliatory attacks from the Congress and president. For instance, in 1937, February, President Roosevelt Franklin retaliated the Supreme Court over its decisions regarding New Deal legislation. It was a very controversial attack that really shaped the political and judicial climate of the

Evaluation Of Total Quality Management (TQM)

Evaluation Of Total Quality Management (TQM) A critical evaluation of total quality management (TQM) and its influences on competitive advantage. The case of Trinidad and Tobago Petroleum Marketing Company Limited (NP), automotive lubricant division 1.1 Background Slack (2004) explains that Quality management is extremely important in gaining and sustaining competitive advantage. Growth, survival and attainment of strategic goals are all major issues of any organization quality therefore become a major issue. Existing as a private label company NP has made their way into a market filled with experienced multinationals via for increased market share. Competitors compete in terms of pricing and quality, thus NP has to make a strong dent into the impact of the customer on these bases. Vying for increased market share the need for core competencies arises and as such quality should be the number one focus. 1.2 Company background As with many companies The Trinidad and Tobago National Petroleum Marketing Company Limited (NP) has an unfolding history. This company is owned by the Government of Trinidad and Tobago and incorporated in 1972. Many acquisitions by the Government took place which put NP in its position within the industry today. NP acquired the assets of Shell Trinidad Limited thereby inheriting their Lubricant Blending Plant sited at Sea Lots, on the outskirts of Port of Spain. Under license, it continued to produce a range of lubricants, blended according to the Shell formulations, until the National Petroleum Brand of lubricants was launched in 1981. Since then NP continues to improve its product rating, they keep abreast of significant technological advancement in the lubricants industry. Despite competition from multi-national companies, NP brand continues to be a major player in the local and Caribbean markets, where ità ¢Ã¢â€š ¬Ã¢â€ž ¢s automotive and industrial lubricating oils and greases hold varying, but significant market share. NP stands out as one of the most successful state enterprises in the Republic of Trinidad and Tobago.  [1]   1.3 Mission 1.4 Vision 1.5 Rationale for the study Rivalry has always been a major determinant of quality of products or services. Quality management and competitive advantage is a marriage necessary for the success of a company. Thus the researcher believes that total quality management principles can be applied within NPà ¢Ã¢â€š ¬Ã¢â€ž ¢s operations to gain an advantage over their competitors. In todayà ¢Ã¢â€š ¬Ã¢â€ž ¢s competitive arena brand image is everything, therefore if a company is able to sell their image then increased market share can be attained. The researcher therefore believes that quality will be a key determinant on NPà ¢Ã¢â€š ¬Ã¢â€ž ¢s brand image and overall head point within the industry. A customersà ¢Ã¢â€š ¬Ã¢â€ž ¢ right to boast of brands have always been a trend in todayà ¢Ã¢â€š ¬Ã¢â€ž ¢s world, thus the ability to gain customers who can boast of NPà ¢Ã¢â€š ¬Ã¢â€ž ¢s brand is essential. This aspect will be the basis of the issue as NP exists in an industry filled will multi-national players, thus competition is fierce and forceful. With the economic downfall, companies were faced with increases in production costs, thus this cost was transferred to consumers. In the first quarter of 2010 NPà ¢Ã¢â€š ¬Ã¢â€ž ¢s prices of its automotive lubricants rose twice. During an economic turmoil customers demand value for their money. Essentially quality will determine customerà ¢Ã¢â€š ¬Ã¢â€ž ¢s perception of products, thus ensuring a sale and continued loyalty. New methods of operations are expected to arise in an attempt to improve quality standards towards gaining a better positioning within the industry. Insights of best practices are also expected to arise. Improved efficiency and effectiveness in operations, branding, communication and services are all areas in which the researcher expects quality management to impact, thus this research can shed light on all of these areas to assist NP in attaining their mission and vision statement. 1.6 Research Aims Research question: Can the adoption of TQM contribute to competitive advantage at NP? Objectives: To critically assess the strategic TQM at NP. To evaluate the industry standards to benchmark TQM at NP. To ascertain the extent to which NP is in compliance with industry standards. To formulate recommendations with reference to quality management best practice and based on research findings. These aims are found to be most important as it is hoped to achieve a firsthand view into the quality management practices in relation to operations and how these practices contribute and impact on competitive advantage. 2.0 LITERATURE REVIEW First hand knowledge is gained through the experiences of trial and error; companies have been able to create quality initiatives relevant to their operations. Various scholars have also contributed to the field of quality management by proposing models and frameworks. The researcher will examine secondary data from research to be conducted and analyze this against the literature review. Major areas of this literature review will therefore be: Total quality management Quality management systems The process approach Six sigma Balanced scorecard It is against these criteria that this literature review aims to provide pertinent information to critically assess the topic at hand. A definition of what a literature review is given as 2.1 TOTAL QUALITY MANAGEMENT (TQM) When considering business activities, ignoring quality can be a key ingredient for inefficiency and loss of profits. Hannagan (2002) claims The main objective of businesses is to make the highest profits possible; therefore one must consider the TQM issues in an attempt to succeed. 2.2 ORIGIN OF TQM Slack (2004) explains that the origin of TQM was a development by several à ¢Ã¢â€š ¬Ã‹Å"quality gurusà ¢Ã¢â€š ¬Ã¢â€ž ¢ beginning from as early as 1957. Feigenbaum 1957 introduced the term TQM and he defined it as 2.3 WHAT IS TQM? Slack (2004) further goes on to state that TQM is best thought of as 2.4 TQM QUALITY INITIATIVES MANAGED Hannagan (2002) presents the thought that Organizations adopt TQM as a way of life as it is proved by quality throughout production until the product or service reaches the external customer. This process is measured by the quality of materials purchased from suppliers, the approach to defect control on the production line, the appearance of the building, the way problems are solved for customers, the way employees are organized and the organizations internal communication system. Hannagan (2002) continues by saying that Hannagan (2002) goes on further by claiming that TQM is a strategic approach within an organisation which can provide an à ¢Ã¢â€š ¬Ã‹Å"umbrellaà ¢Ã¢â€š ¬Ã¢â€ž ¢ under which a number of quality initiatives can be managed. These initiatives include: Statistical process control Right-first-time Just-in-time Quality assurance Benchmarking Quality circles Tauguchi method 2.5 CRITISM OF TQM IMPLEMENTATION Slack (20004) argues that These programmes may loose their impulse over time. This has been variously described as quality disillusionment and quality droop. Various researchers and consultants who have implemented TQM, Slack (2004) argues have put forward prescriptions which are intended to reduce the risk of recurring. These include the following: Do not define à ¢Ã¢â€š ¬Ã‹Å"qualityà ¢Ã¢â€š ¬Ã¢â€ž ¢ in TQM narrowly; it includes all aspects of performance. Make all quality improvement relate to the performance objectives of the operations. TQM is a means of improving performance and not an end in itself. TQM should not be viewed as a substitute for responsibilities of normal managerial leadership. It is important to note that ineffective managers are not made better simply by adopting TQM. TQM is not an attachment of a company. It should be integrated with and indistinguishable from everyday activities. TQM has a considerable intuitive attraction. It is sometimes tempting to exploit the motivation à ¢Ã¢â€š ¬Ã‹Å"pullà ¢Ã¢â€š ¬Ã¢â€ž ¢ of TQM rather than thoroughly thought-out plans. Different organizations will have different needs depending on their circumstances. TQM should be adapted to these circumstances. Companies may push quality for its own sake, and shift too much responsibility down to the shop floor. In addition TQM is incompatible with more radical improvement approaches such as business process reengineering (BPR). TQM may also imply empowerment and liberal attitude toward shop floor staff; however it is argued that this is merely a further example of management exploiting workers. Critics have been known to define TQM as à ¢Ã¢â€š ¬Ã…“management by stressà ¢Ã¢â€š ¬?. 2.6 QUALITY MANAGEMENT SYSTEMS (QMS) AND PROCESSES A SIMPLE FLOWCHART SHOWING HOW PROCESSES ARE CHARTED IN AN ORGANISATION SOURCE: http://www.praxiom.com/process-approach.htm QUALITY MANAGEMENT SYSTEM (QMS) PRINCIPLES AND STANDARDS SOURCE: http://www.abcb.demon.co.uk/iso9k2kworkbook_part5.html Quality management system seeks to identify external quality related input requirements specified in Licenses to Trade, regulations, specified customer requirements and the chosen management system standard(s). In addition quality systems seek to define performance measures, as applicable, to the system requirements and generate the result or evidence that system requirements have been executed. The next step is to measure, monitor and report extent of compliance with these performance measures.  [2]   To achieve a standard the first step is to implement a QMS. Implementing a QMS can help your business to: achieve greater consistency, reduce expensive mistakes, increase efficiency, gain customer satisfaction, effectively market your business, exploit new markets manage growth more effectively and constantly improve your products, processes and systems. 2.7 THE PROCESS APPROACH The ISO 9000 series of standards is the main set of International Standards applying to the management of quality systems. It includes ISO 9001, the key internationally agreed standard for a QMS. Achieving ISO 9001 certification could mean new business. This certification can help distinguish à ¢Ã¢â€š ¬Ã‹Å"youà ¢Ã¢â€š ¬Ã¢â€ž ¢ from competitors.   Slack (2004) refers to the ISO 9000 series as Slack (2004) recognizes that there are four additional principles which ISO 9000 stresses upon. He argues that quality management should be customer focused. In addition he states that quality performance should be measured. Thirdly Slack sees the need for quality management to be improvement driven. Fourthly top management must demonstrate their commitment to maintaining and continually improving management systems. ADVANTAGES AND DISADVANTAGES OF CERTIFICATION ADVANTAGES: 1. Increased Efficiency: Companies that go through the ISO 9001:2000 Quality Management Standards certification process have given a lot of thought to their processes and how to maximize quality and efficiency. 2. Increased Revenue: Studies have shown that ISO QMS certified companies experience increased productivity and improved financial performance, compared to uncertified companies. 3. Customer Satisfaction: Client confidence is gained because of the universal acceptance of the ISO standards. Customer satisfaction is ensured because of the benefits of ISO 9001:2000 QMS to company efficiency, consistency and dedication to quality service.  [3]   DISADVANTAGES: The actual change to ISO 9000 for operations can be very expensive. As is well known in business and industry, it is difficult to change the habits of long-time employees. New ways are usually resisted by everyone. This resistance cuts into profits and also decreases company morale. There are times when companies feel that the existing set of operational procedures is already working well and they do not feel a change is necessary. Now these companies have the choice of loosing a customer or implementing ISO 9000. Either way money is lost in the short term.  [4]   2.8 SIX SIGMA INITIATIVES Six Sigma simply means a measure of quality that strives for near perfection. Six Sigma is a disciplined, data-driven approach and methodology for eliminating defects in any process whether it is from manufacturing to transactional and from product to service. The fundamental objective of the Six Sigma methodology is the implementation of a measurement-based strategy that focuses on process improvement and variation reduction through the application of Six Sigma improvement projects.  [5]   Slack (2004) explains that Six Sigma processes are executed via belts. Master Black Belts are the experts in the use of Six Sigma tools, techniques and implementations. Six Sigma Black Belts can take a direct hand in organizing improvement teams. Green Belts work within improvement teams; they are not full-time positioned and have normal day-to-day process responsibilities. It is expected that they spend at least twenty per cent of their time in improvement projects. ARGUMENTS FOR AND against THE SIX SIGMA INITIATIVE Slack (2004) identifies the following positive perspectives of the Six Sigma initiative: Improvement activity is generally neglected in most operations and if it is to be taken seriously, it deserves the significant investment required. If operated well, Six Sigma improvement projects controlled by experienced personnel can save more than their cost. Slack (2004) identifies the following flaws of the Six Sigma initiative. It can be too hierarchical in the way it structures its various levels of involvement in the improvement activity. It is expensive. Training and improvement time can prove to be costly. 2.9 THE BALANCED SCORECARD The balanced scorecard is a strategic planning and management system that is used  to align business activities to the vision and strategy of the organization, improve internal and external communications, and monitor organization performance against strategic goals. It was originated by Drs. Robert Kaplan and David Norton  as a performance measurement framework  that  added strategic  non-financial performance measures to traditional financial metrics to  give managers and executives a  more balanced view of organizational performance.   DIAGRAM SHOWING THE VIEW OF THE BALANCED SCORECARD FROM FOUR PERSPECTIVES SOURCE:http://www.balancedscorecard.org/BSCResources/AbouttheBalancedScorecard/tabid/55/Default.aspx The balanced scorecard suggests that we view the organization from four perspectives, and to develop metrics, collect data and analyze it relative to each of these perspectives: The Learning Growth Perspective includes employee training and corporate cultural attitudes related to both individual and corporate self-improvement. The Business Process Perspective refers to internal business processes. Metrics based on this perspective allow the managers to know how well their business is running, and whether its products and services conform to customer requirements. The Customer Perspective explains that the realization of the importance of customer focus and customer satisfaction in any business is essential. The Financial Perspective states that often there is more than enough handling and processing of financial data. With the implementation of a corporate database, it is hoped that more of the processing can be centralized and automated.  [6]   Quality indeed provides companies with a competitive edge. Total quality management looks at a companyà ¢Ã¢â€š ¬Ã¢â€ž ¢s operations holistically and determines best practice quality initiatives. Though there are pitfalls to the strategic implication of TQM, compilation of proper initiatives can reduce the occurrence of such pitfalls. TQM initiatives can also result in customer satisfaction, thereby resulting in customer loyalty. 3.0 METHODOLOGY Saunders (2003) simply defines methodology as Haralambos (2000) however goes a bit further by explaining what methodology is concerned with. He sees methodology as being The research to be conducted will take a deductive approach. This research approach is found to be the most appropriate, as a topic/ hypothesis is designed and a research strategy is designed to test the topic/ hypothesis. Although the research is a deductive piece of work, the researcher will adopt a mixed approach to data collection. That is the research paradigm will be a mixture of both qualitative and quantitative data. Generally the philosophies used are positivists and phenomenologist. Triangulation research will be conducted as this will increase validity and reliability. Research question: Can the adoption of total quality management (TQM) contribute to competitive advantage at NP? Having formulated the research topic it is essential that the researcher answers the research question. Thus essentially the researcher will undertake many strategies in addressing this question. By conducting structured research via hypothesis testing and analyze of information based on best practices and recommendations the answer to the research question will be attained. Thus the use of both primary and secondary data collection tools will be profound for this question. OBJECTIVE ONE: To critically assess the strategic total quality management initiatives at NP. In collecting data for objective one the researcher has found it fit to use case studies. Robson (2002) defines case study AS The data collection methods will include questionnaires, interviews, observations and documentary analysis. The researcher will select interviews and documentary analysis in an attempt to collect the data required. Interviews will be conducted by the researcher. Structured interviews will be utilized. Two groups will be targeted: quality control managers and quality supervisors. This will be done in an attempt to gain information based on the quality methods and standards N.P. currently has. Also to establish the quality initiatives deployed from subordinates in the upper section of the organizational structure. This data collection method will be of primary nature. Interviews will be conducted to these groups because these are the groups with the required information. Documentation analysis will also be selected as a means of data collection. The method used is necessary to gain information about N.P. and their documents based on quality control. It is intended to identify inspection points, certifications, specifications and any other relevant documents based on quality control initiatives. This data collection method is of secondary nature. This method will be used as it is upon these documents that N.P. thrives for their quality standards. Analytical technique: the funnel technique will be used in conducting interviews. Quality initiatives are not easily shared therefore by beginning the interview with general questions and narrowing down, the groups targeted will feel comfortable and easy going thereby gaining the information desired. Justification of methods: The researcher has found it useful to conduct interviews as detailed information is gained from people in a face-to-face situation, thereby allowing interviewers to explore issues in- depth. This method has its downside as it gives rise to the possibility of biasness due to interaction. In conducting documentation analysis the researcher will analyze documents in an attempt to identify trends in sales performance relative to competitorsà ¢Ã¢â€š ¬Ã¢â€ž ¢ performance with respect to the quality initiatives employed at this company. OBJECTIVE TWO: To evaluate the industry standards to benchmark TQM at NP. In collecting data for objective two the researcher found it useful to conduct surveys. Letts (2000) explains Saunders (2003) goes on further on this point by claiming that Data here is collected by using questionnaires, structured observations and structured interviews. Data collected from surveys are standardized, allowing easy comparison. The researcher will use questionnaires and structured observations in an attempt to collect the necessary data. A questionnaire will be constructed containing twenty five questions, in which respondents will be asked to answer. The questionnaire will be handed out to other companies within the industry. These companies include Bel-Ray, Castrol, Havoline and Shell. A total of 10 questionnaires each will be given out at these companies. These questionnaires will be given to members within the quality departments of these companies. These members will be randomly selected within the department. Questionnaires will be given out to these members as it was them who will have the required information. Structured observations will also be used to collect data. The researcher will adopt a participant observation approach to this method. While at the various service stations, quick shops and auto mechanic parts shops the researcher will spend time observing customersà ¢Ã¢â€š ¬Ã¢â€ž ¢ choice of lubricants when other brands are available. In addition observations will be made based on the prices of other brands compared to N.P.à ¢Ã¢â€š ¬Ã¢â€ž ¢s brand and customer perception of quality based upon this factor. Research will be done on both customers and companiesà ¢Ã¢â€š ¬Ã¢â€ž ¢ quality departments. This will be undertaken as gaining an increased market share results in gaining a resource capability towards having a competitive advantage. Thus customerà ¢Ã¢â€š ¬Ã¢â€ž ¢s preferences of one product over another will give the researcher the entities of what constitutes competitive advantage based on quality. Thus making room for opportunities for benchmarking based on specifications u tilized by other companies within the industry. Justification of methods: Questionnaires will be utilized as the researcher wishes to question a large number of individuals within a short space of time. Time would constraint the researcher in conducting interviews with 40 persons individually within the industry. Participant observation will be used in an attempt to gain a complete understanding of the views, preferences and beliefs of the people being surveyed. In addition the researcher will interact with individuals of the sample in an attempt to gain reasons for their choice. The researcher will acknowledge that there will be a major drawback by using questionnaires. That is they cannot address issues in-depth. It is for this reason that participant observation will be used hand in hand with the questionnaire as it will allow individuals to go in depth on issues. Analytical technique: the researcher will use cognitive access in an attempt to gain information from customers. Participant observation requires interactive processes, therefore it is crucial to gain entry and carry out the research. The researcher acknowledges the fact that informal acceptance from intended participants will be necessary in order to gain access to the required information. Cognitive access will be used as it is necessary for participants to feel understood and this will allow the researcher to gain an understanding of their social reality by allowing them to know what is being studied and the objective. This aims at making participants openly give information based on the objective of the research. Objective three: To ascertain the extent to which NP is in compliance with industry standards. Documentation analysis will be selected as the means of data collection for the attainment of this objective. This method is necessary for analyzing the information gained about N.P.à ¢Ã¢â€š ¬Ã¢â€ž ¢s documentations based on quality control. The N.P.à ¢Ã¢â€š ¬Ã¢â€ž ¢s quality initiatives discovered will be scrutinized along side information attained from the industry analysis. It is intended to identify gaps within the operation requirements relevant to inspection points, certifications, specifications and any other relevant quality control initiatives. This data collection method is of secondary nature. This method will be used as it is upon these analyses that gaps will be identified and compliance standards assessed. Justification of methods: documentation analysis was found to be the most appropriate method as it will provide comparative and contextual data. This method will allow the researcher to compare and contrast findings when compared to secondary data. OBJECTIVE FOUR: To formulate recommendations with reference to quality management best practice and based on research findings. In collecting data for objective three the researcher will use the multiple- source secondary data process. This objective will be achieved by evaluating the literature and documentary secondary data and matching up the findings to the survey- based secondary data. Documentary secondary data uses a combination of primary and secondary data. By reviewing the literature based on the selected topic, quality management best practice in relation to N.P. will be determined. In addition companyà ¢Ã¢â€š ¬Ã¢â€ž ¢s print out from their intranet will be used to gain an inside view of N.P.à ¢Ã¢â€š ¬Ã¢â€ž ¢s perspective of quality management best practice. Survey- based secondary data will allow the researcher to compare the findings gained from doing research via survey and case study methods to information derived from documentary secondary data. The researcher will be able to make recommendations based on this comparison. The comparison of the findings from both documentary secondary data and survey base secondary data will be necessary as this is the method which will reveal the necessary information. Justification of methods: The multiple- source secondary data process was found to be the most appropriate as it will provide comparative and contextual data. This method will allow the researcher to compare and contrast findings when compared to secondary data. The researcher however acknowledges the fact that there may be no real control over the quality of data. 3.1 ethical issues The research will guard against any unethical methods of data collection. Essentially the criteria relevant to the methods of data collection chosen are as follows: Voluntary participation and conformed consent: all participants will not be coerced into participating in the research. Consent will be sought after from all parties to be studied. All participants will be given a through breakdown on the study and its aims. Confidentiality and anonymity: the researcher will not seek after names or any personal information which may reveal the participantà ¢Ã¢â€š ¬Ã¢â€ž ¢s identity. This will be made clear to all parties in advance of the method of data collection. 3.2 Limitations of study When conducting research and collecting data one must consider the limitations of the study as this may provide boundaries and barriers to gaining a representative and accurate piece of work. The researcher will therefore guard against the following: Response rate: limited time and anonymity of respondents may provide barriers to the researcher for following up on people who didnà ¢Ã¢â€š ¬Ã¢â€ž ¢t respond, thus resulting in a low response rate. Scope of information: Companies cherishes their quality management secrets and guiding principles, therefore information on the characteristics of the quality management initiatives may not be divulged. Time: the limited timeframe allotted to conduct this study may constrain the researcher form collecting sufficient comparative data from competitors in an attempt to present a more in-depth comparative analysis. Generalization: due to the nature of the topic and the research objectives, the findings may not be applicable to other organizations. The situation, time and place may be of a different nature. 3.3 RESEARCH TOOLS The researcher will ensure that the tools and resources are available to carry out the research designs. These materials will include: Stationary tools: pens; paper and note pads. Data collection tool: questionnaires and voice recorder. Monetary tools: The researcher will require finances to reach destination to attain data. 3.4 MARGIN OF ERROR: DATA RELIABILITY, VALIDITY AND ACCURACY Reliability and accuracy: McNeil (à ¢Ã¢â€š ¬Ã‹Å"research methodsà ¢Ã¢â€š ¬Ã¢â€ž ¢) defines data as Data reliability therefore, is concerned with ideas such as: 1. The consistency of the data collected 2. The precision with which data is collected 3. The ability to replicate a piece of work. The reliability of data collected will be an important consideration since if data used is not reliable, then the conclusions or findings drawn will be fairly useless. Data reliability will be affected by such things as researcher bias into data collection processes, standardization and interpretation. The inability to record data accurately will cause the data to be less reliable. Validity: Data is only useful if it measures what it is supposed to measure. Validity refers to the extent to which the data collected gives true measurement of social reality.  [7]   When conducting research the concepts of reliability, validity and accuracy go hand in hand. It would be safe to say therefore that if data is reliable but not valid then it may have limited use. Also if data is valid, but not reliable the researcher may not be able to make general statements. In undertaking this research the researcher acknowledges the fact that the research will not be one hundred percent (100%) reliable, valid and accurate. However the researcher will make every attempt to achieve these in an aim to stand against scrutiny. The researcher will conduct the research in a highly professional, ethical and confidential manner. In addition all interpretations and collection of data will be made in an attempt to be unbiased. 4.0 Justification of time plan Essentially projects must conform to set deadline dates. Thus a plan is essential to ensure the successful completion within the timeframe allowed. The dates proposed are expected to conformation however contingencies will assist the researcher in any short comings. These dates are given in medium term expected time span, therefore any additional times required will be attained via slack times gained form other tasks running simultaneously. Therefore undergoing a successful dissertation a timescale becomes necessary to use to gain efficiency and complete the project on time. For the purpose of this study the duration will be six months. The stating date will be June 15th 2010 to December 15th 2010. Evaluation Of Total Quality Management (TQM) Evaluation Of Total Quality Management (TQM) A critical evaluation of total quality management (TQM) and its influences on competitive advantage. The case of Trinidad and Tobago Petroleum Marketing Company Limited (NP), automotive lubricant division 1.1 Background Slack (2004) explains that Quality management is extremely important in gaining and sustaining competitive advantage. Growth, survival and attainment of strategic goals are all major issues of any organization quality therefore become a major issue. Existing as a private label company NP has made their way into a market filled with experienced multinationals via for increased market share. Competitors compete in terms of pricing and quality, thus NP has to make a strong dent into the impact of the customer on these bases. Vying for increased market share the need for core competencies arises and as such quality should be the number one focus. 1.2 Company background As with many companies The Trinidad and Tobago National Petroleum Marketing Company Limited (NP) has an unfolding history. This company is owned by the Government of Trinidad and Tobago and incorporated in 1972. Many acquisitions by the Government took place which put NP in its position within the industry today. NP acquired the assets of Shell Trinidad Limited thereby inheriting their Lubricant Blending Plant sited at Sea Lots, on the outskirts of Port of Spain. Under license, it continued to produce a range of lubricants, blended according to the Shell formulations, until the National Petroleum Brand of lubricants was launched in 1981. Since then NP continues to improve its product rating, they keep abreast of significant technological advancement in the lubricants industry. Despite competition from multi-national companies, NP brand continues to be a major player in the local and Caribbean markets, where ità ¢Ã¢â€š ¬Ã¢â€ž ¢s automotive and industrial lubricating oils and greases hold varying, but significant market share. NP stands out as one of the most successful state enterprises in the Republic of Trinidad and Tobago.  [1]   1.3 Mission 1.4 Vision 1.5 Rationale for the study Rivalry has always been a major determinant of quality of products or services. Quality management and competitive advantage is a marriage necessary for the success of a company. Thus the researcher believes that total quality management principles can be applied within NPà ¢Ã¢â€š ¬Ã¢â€ž ¢s operations to gain an advantage over their competitors. In todayà ¢Ã¢â€š ¬Ã¢â€ž ¢s competitive arena brand image is everything, therefore if a company is able to sell their image then increased market share can be attained. The researcher therefore believes that quality will be a key determinant on NPà ¢Ã¢â€š ¬Ã¢â€ž ¢s brand image and overall head point within the industry. A customersà ¢Ã¢â€š ¬Ã¢â€ž ¢ right to boast of brands have always been a trend in todayà ¢Ã¢â€š ¬Ã¢â€ž ¢s world, thus the ability to gain customers who can boast of NPà ¢Ã¢â€š ¬Ã¢â€ž ¢s brand is essential. This aspect will be the basis of the issue as NP exists in an industry filled will multi-national players, thus competition is fierce and forceful. With the economic downfall, companies were faced with increases in production costs, thus this cost was transferred to consumers. In the first quarter of 2010 NPà ¢Ã¢â€š ¬Ã¢â€ž ¢s prices of its automotive lubricants rose twice. During an economic turmoil customers demand value for their money. Essentially quality will determine customerà ¢Ã¢â€š ¬Ã¢â€ž ¢s perception of products, thus ensuring a sale and continued loyalty. New methods of operations are expected to arise in an attempt to improve quality standards towards gaining a better positioning within the industry. Insights of best practices are also expected to arise. Improved efficiency and effectiveness in operations, branding, communication and services are all areas in which the researcher expects quality management to impact, thus this research can shed light on all of these areas to assist NP in attaining their mission and vision statement. 1.6 Research Aims Research question: Can the adoption of TQM contribute to competitive advantage at NP? Objectives: To critically assess the strategic TQM at NP. To evaluate the industry standards to benchmark TQM at NP. To ascertain the extent to which NP is in compliance with industry standards. To formulate recommendations with reference to quality management best practice and based on research findings. These aims are found to be most important as it is hoped to achieve a firsthand view into the quality management practices in relation to operations and how these practices contribute and impact on competitive advantage. 2.0 LITERATURE REVIEW First hand knowledge is gained through the experiences of trial and error; companies have been able to create quality initiatives relevant to their operations. Various scholars have also contributed to the field of quality management by proposing models and frameworks. The researcher will examine secondary data from research to be conducted and analyze this against the literature review. Major areas of this literature review will therefore be: Total quality management Quality management systems The process approach Six sigma Balanced scorecard It is against these criteria that this literature review aims to provide pertinent information to critically assess the topic at hand. A definition of what a literature review is given as 2.1 TOTAL QUALITY MANAGEMENT (TQM) When considering business activities, ignoring quality can be a key ingredient for inefficiency and loss of profits. Hannagan (2002) claims The main objective of businesses is to make the highest profits possible; therefore one must consider the TQM issues in an attempt to succeed. 2.2 ORIGIN OF TQM Slack (2004) explains that the origin of TQM was a development by several à ¢Ã¢â€š ¬Ã‹Å"quality gurusà ¢Ã¢â€š ¬Ã¢â€ž ¢ beginning from as early as 1957. Feigenbaum 1957 introduced the term TQM and he defined it as 2.3 WHAT IS TQM? Slack (2004) further goes on to state that TQM is best thought of as 2.4 TQM QUALITY INITIATIVES MANAGED Hannagan (2002) presents the thought that Organizations adopt TQM as a way of life as it is proved by quality throughout production until the product or service reaches the external customer. This process is measured by the quality of materials purchased from suppliers, the approach to defect control on the production line, the appearance of the building, the way problems are solved for customers, the way employees are organized and the organizations internal communication system. Hannagan (2002) continues by saying that Hannagan (2002) goes on further by claiming that TQM is a strategic approach within an organisation which can provide an à ¢Ã¢â€š ¬Ã‹Å"umbrellaà ¢Ã¢â€š ¬Ã¢â€ž ¢ under which a number of quality initiatives can be managed. These initiatives include: Statistical process control Right-first-time Just-in-time Quality assurance Benchmarking Quality circles Tauguchi method 2.5 CRITISM OF TQM IMPLEMENTATION Slack (20004) argues that These programmes may loose their impulse over time. This has been variously described as quality disillusionment and quality droop. Various researchers and consultants who have implemented TQM, Slack (2004) argues have put forward prescriptions which are intended to reduce the risk of recurring. These include the following: Do not define à ¢Ã¢â€š ¬Ã‹Å"qualityà ¢Ã¢â€š ¬Ã¢â€ž ¢ in TQM narrowly; it includes all aspects of performance. Make all quality improvement relate to the performance objectives of the operations. TQM is a means of improving performance and not an end in itself. TQM should not be viewed as a substitute for responsibilities of normal managerial leadership. It is important to note that ineffective managers are not made better simply by adopting TQM. TQM is not an attachment of a company. It should be integrated with and indistinguishable from everyday activities. TQM has a considerable intuitive attraction. It is sometimes tempting to exploit the motivation à ¢Ã¢â€š ¬Ã‹Å"pullà ¢Ã¢â€š ¬Ã¢â€ž ¢ of TQM rather than thoroughly thought-out plans. Different organizations will have different needs depending on their circumstances. TQM should be adapted to these circumstances. Companies may push quality for its own sake, and shift too much responsibility down to the shop floor. In addition TQM is incompatible with more radical improvement approaches such as business process reengineering (BPR). TQM may also imply empowerment and liberal attitude toward shop floor staff; however it is argued that this is merely a further example of management exploiting workers. Critics have been known to define TQM as à ¢Ã¢â€š ¬Ã…“management by stressà ¢Ã¢â€š ¬?. 2.6 QUALITY MANAGEMENT SYSTEMS (QMS) AND PROCESSES A SIMPLE FLOWCHART SHOWING HOW PROCESSES ARE CHARTED IN AN ORGANISATION SOURCE: http://www.praxiom.com/process-approach.htm QUALITY MANAGEMENT SYSTEM (QMS) PRINCIPLES AND STANDARDS SOURCE: http://www.abcb.demon.co.uk/iso9k2kworkbook_part5.html Quality management system seeks to identify external quality related input requirements specified in Licenses to Trade, regulations, specified customer requirements and the chosen management system standard(s). In addition quality systems seek to define performance measures, as applicable, to the system requirements and generate the result or evidence that system requirements have been executed. The next step is to measure, monitor and report extent of compliance with these performance measures.  [2]   To achieve a standard the first step is to implement a QMS. Implementing a QMS can help your business to: achieve greater consistency, reduce expensive mistakes, increase efficiency, gain customer satisfaction, effectively market your business, exploit new markets manage growth more effectively and constantly improve your products, processes and systems. 2.7 THE PROCESS APPROACH The ISO 9000 series of standards is the main set of International Standards applying to the management of quality systems. It includes ISO 9001, the key internationally agreed standard for a QMS. Achieving ISO 9001 certification could mean new business. This certification can help distinguish à ¢Ã¢â€š ¬Ã‹Å"youà ¢Ã¢â€š ¬Ã¢â€ž ¢ from competitors.   Slack (2004) refers to the ISO 9000 series as Slack (2004) recognizes that there are four additional principles which ISO 9000 stresses upon. He argues that quality management should be customer focused. In addition he states that quality performance should be measured. Thirdly Slack sees the need for quality management to be improvement driven. Fourthly top management must demonstrate their commitment to maintaining and continually improving management systems. ADVANTAGES AND DISADVANTAGES OF CERTIFICATION ADVANTAGES: 1. Increased Efficiency: Companies that go through the ISO 9001:2000 Quality Management Standards certification process have given a lot of thought to their processes and how to maximize quality and efficiency. 2. Increased Revenue: Studies have shown that ISO QMS certified companies experience increased productivity and improved financial performance, compared to uncertified companies. 3. Customer Satisfaction: Client confidence is gained because of the universal acceptance of the ISO standards. Customer satisfaction is ensured because of the benefits of ISO 9001:2000 QMS to company efficiency, consistency and dedication to quality service.  [3]   DISADVANTAGES: The actual change to ISO 9000 for operations can be very expensive. As is well known in business and industry, it is difficult to change the habits of long-time employees. New ways are usually resisted by everyone. This resistance cuts into profits and also decreases company morale. There are times when companies feel that the existing set of operational procedures is already working well and they do not feel a change is necessary. Now these companies have the choice of loosing a customer or implementing ISO 9000. Either way money is lost in the short term.  [4]   2.8 SIX SIGMA INITIATIVES Six Sigma simply means a measure of quality that strives for near perfection. Six Sigma is a disciplined, data-driven approach and methodology for eliminating defects in any process whether it is from manufacturing to transactional and from product to service. The fundamental objective of the Six Sigma methodology is the implementation of a measurement-based strategy that focuses on process improvement and variation reduction through the application of Six Sigma improvement projects.  [5]   Slack (2004) explains that Six Sigma processes are executed via belts. Master Black Belts are the experts in the use of Six Sigma tools, techniques and implementations. Six Sigma Black Belts can take a direct hand in organizing improvement teams. Green Belts work within improvement teams; they are not full-time positioned and have normal day-to-day process responsibilities. It is expected that they spend at least twenty per cent of their time in improvement projects. ARGUMENTS FOR AND against THE SIX SIGMA INITIATIVE Slack (2004) identifies the following positive perspectives of the Six Sigma initiative: Improvement activity is generally neglected in most operations and if it is to be taken seriously, it deserves the significant investment required. If operated well, Six Sigma improvement projects controlled by experienced personnel can save more than their cost. Slack (2004) identifies the following flaws of the Six Sigma initiative. It can be too hierarchical in the way it structures its various levels of involvement in the improvement activity. It is expensive. Training and improvement time can prove to be costly. 2.9 THE BALANCED SCORECARD The balanced scorecard is a strategic planning and management system that is used  to align business activities to the vision and strategy of the organization, improve internal and external communications, and monitor organization performance against strategic goals. It was originated by Drs. Robert Kaplan and David Norton  as a performance measurement framework  that  added strategic  non-financial performance measures to traditional financial metrics to  give managers and executives a  more balanced view of organizational performance.   DIAGRAM SHOWING THE VIEW OF THE BALANCED SCORECARD FROM FOUR PERSPECTIVES SOURCE:http://www.balancedscorecard.org/BSCResources/AbouttheBalancedScorecard/tabid/55/Default.aspx The balanced scorecard suggests that we view the organization from four perspectives, and to develop metrics, collect data and analyze it relative to each of these perspectives: The Learning Growth Perspective includes employee training and corporate cultural attitudes related to both individual and corporate self-improvement. The Business Process Perspective refers to internal business processes. Metrics based on this perspective allow the managers to know how well their business is running, and whether its products and services conform to customer requirements. The Customer Perspective explains that the realization of the importance of customer focus and customer satisfaction in any business is essential. The Financial Perspective states that often there is more than enough handling and processing of financial data. With the implementation of a corporate database, it is hoped that more of the processing can be centralized and automated.  [6]   Quality indeed provides companies with a competitive edge. Total quality management looks at a companyà ¢Ã¢â€š ¬Ã¢â€ž ¢s operations holistically and determines best practice quality initiatives. Though there are pitfalls to the strategic implication of TQM, compilation of proper initiatives can reduce the occurrence of such pitfalls. TQM initiatives can also result in customer satisfaction, thereby resulting in customer loyalty. 3.0 METHODOLOGY Saunders (2003) simply defines methodology as Haralambos (2000) however goes a bit further by explaining what methodology is concerned with. He sees methodology as being The research to be conducted will take a deductive approach. This research approach is found to be the most appropriate, as a topic/ hypothesis is designed and a research strategy is designed to test the topic/ hypothesis. Although the research is a deductive piece of work, the researcher will adopt a mixed approach to data collection. That is the research paradigm will be a mixture of both qualitative and quantitative data. Generally the philosophies used are positivists and phenomenologist. Triangulation research will be conducted as this will increase validity and reliability. Research question: Can the adoption of total quality management (TQM) contribute to competitive advantage at NP? Having formulated the research topic it is essential that the researcher answers the research question. Thus essentially the researcher will undertake many strategies in addressing this question. By conducting structured research via hypothesis testing and analyze of information based on best practices and recommendations the answer to the research question will be attained. Thus the use of both primary and secondary data collection tools will be profound for this question. OBJECTIVE ONE: To critically assess the strategic total quality management initiatives at NP. In collecting data for objective one the researcher has found it fit to use case studies. Robson (2002) defines case study AS The data collection methods will include questionnaires, interviews, observations and documentary analysis. The researcher will select interviews and documentary analysis in an attempt to collect the data required. Interviews will be conducted by the researcher. Structured interviews will be utilized. Two groups will be targeted: quality control managers and quality supervisors. This will be done in an attempt to gain information based on the quality methods and standards N.P. currently has. Also to establish the quality initiatives deployed from subordinates in the upper section of the organizational structure. This data collection method will be of primary nature. Interviews will be conducted to these groups because these are the groups with the required information. Documentation analysis will also be selected as a means of data collection. The method used is necessary to gain information about N.P. and their documents based on quality control. It is intended to identify inspection points, certifications, specifications and any other relevant documents based on quality control initiatives. This data collection method is of secondary nature. This method will be used as it is upon these documents that N.P. thrives for their quality standards. Analytical technique: the funnel technique will be used in conducting interviews. Quality initiatives are not easily shared therefore by beginning the interview with general questions and narrowing down, the groups targeted will feel comfortable and easy going thereby gaining the information desired. Justification of methods: The researcher has found it useful to conduct interviews as detailed information is gained from people in a face-to-face situation, thereby allowing interviewers to explore issues in- depth. This method has its downside as it gives rise to the possibility of biasness due to interaction. In conducting documentation analysis the researcher will analyze documents in an attempt to identify trends in sales performance relative to competitorsà ¢Ã¢â€š ¬Ã¢â€ž ¢ performance with respect to the quality initiatives employed at this company. OBJECTIVE TWO: To evaluate the industry standards to benchmark TQM at NP. In collecting data for objective two the researcher found it useful to conduct surveys. Letts (2000) explains Saunders (2003) goes on further on this point by claiming that Data here is collected by using questionnaires, structured observations and structured interviews. Data collected from surveys are standardized, allowing easy comparison. The researcher will use questionnaires and structured observations in an attempt to collect the necessary data. A questionnaire will be constructed containing twenty five questions, in which respondents will be asked to answer. The questionnaire will be handed out to other companies within the industry. These companies include Bel-Ray, Castrol, Havoline and Shell. A total of 10 questionnaires each will be given out at these companies. These questionnaires will be given to members within the quality departments of these companies. These members will be randomly selected within the department. Questionnaires will be given out to these members as it was them who will have the required information. Structured observations will also be used to collect data. The researcher will adopt a participant observation approach to this method. While at the various service stations, quick shops and auto mechanic parts shops the researcher will spend time observing customersà ¢Ã¢â€š ¬Ã¢â€ž ¢ choice of lubricants when other brands are available. In addition observations will be made based on the prices of other brands compared to N.P.à ¢Ã¢â€š ¬Ã¢â€ž ¢s brand and customer perception of quality based upon this factor. Research will be done on both customers and companiesà ¢Ã¢â€š ¬Ã¢â€ž ¢ quality departments. This will be undertaken as gaining an increased market share results in gaining a resource capability towards having a competitive advantage. Thus customerà ¢Ã¢â€š ¬Ã¢â€ž ¢s preferences of one product over another will give the researcher the entities of what constitutes competitive advantage based on quality. Thus making room for opportunities for benchmarking based on specifications u tilized by other companies within the industry. Justification of methods: Questionnaires will be utilized as the researcher wishes to question a large number of individuals within a short space of time. Time would constraint the researcher in conducting interviews with 40 persons individually within the industry. Participant observation will be used in an attempt to gain a complete understanding of the views, preferences and beliefs of the people being surveyed. In addition the researcher will interact with individuals of the sample in an attempt to gain reasons for their choice. The researcher will acknowledge that there will be a major drawback by using questionnaires. That is they cannot address issues in-depth. It is for this reason that participant observation will be used hand in hand with the questionnaire as it will allow individuals to go in depth on issues. Analytical technique: the researcher will use cognitive access in an attempt to gain information from customers. Participant observation requires interactive processes, therefore it is crucial to gain entry and carry out the research. The researcher acknowledges the fact that informal acceptance from intended participants will be necessary in order to gain access to the required information. Cognitive access will be used as it is necessary for participants to feel understood and this will allow the researcher to gain an understanding of their social reality by allowing them to know what is being studied and the objective. This aims at making participants openly give information based on the objective of the research. Objective three: To ascertain the extent to which NP is in compliance with industry standards. Documentation analysis will be selected as the means of data collection for the attainment of this objective. This method is necessary for analyzing the information gained about N.P.à ¢Ã¢â€š ¬Ã¢â€ž ¢s documentations based on quality control. The N.P.à ¢Ã¢â€š ¬Ã¢â€ž ¢s quality initiatives discovered will be scrutinized along side information attained from the industry analysis. It is intended to identify gaps within the operation requirements relevant to inspection points, certifications, specifications and any other relevant quality control initiatives. This data collection method is of secondary nature. This method will be used as it is upon these analyses that gaps will be identified and compliance standards assessed. Justification of methods: documentation analysis was found to be the most appropriate method as it will provide comparative and contextual data. This method will allow the researcher to compare and contrast findings when compared to secondary data. OBJECTIVE FOUR: To formulate recommendations with reference to quality management best practice and based on research findings. In collecting data for objective three the researcher will use the multiple- source secondary data process. This objective will be achieved by evaluating the literature and documentary secondary data and matching up the findings to the survey- based secondary data. Documentary secondary data uses a combination of primary and secondary data. By reviewing the literature based on the selected topic, quality management best practice in relation to N.P. will be determined. In addition companyà ¢Ã¢â€š ¬Ã¢â€ž ¢s print out from their intranet will be used to gain an inside view of N.P.à ¢Ã¢â€š ¬Ã¢â€ž ¢s perspective of quality management best practice. Survey- based secondary data will allow the researcher to compare the findings gained from doing research via survey and case study methods to information derived from documentary secondary data. The researcher will be able to make recommendations based on this comparison. The comparison of the findings from both documentary secondary data and survey base secondary data will be necessary as this is the method which will reveal the necessary information. Justification of methods: The multiple- source secondary data process was found to be the most appropriate as it will provide comparative and contextual data. This method will allow the researcher to compare and contrast findings when compared to secondary data. The researcher however acknowledges the fact that there may be no real control over the quality of data. 3.1 ethical issues The research will guard against any unethical methods of data collection. Essentially the criteria relevant to the methods of data collection chosen are as follows: Voluntary participation and conformed consent: all participants will not be coerced into participating in the research. Consent will be sought after from all parties to be studied. All participants will be given a through breakdown on the study and its aims. Confidentiality and anonymity: the researcher will not seek after names or any personal information which may reveal the participantà ¢Ã¢â€š ¬Ã¢â€ž ¢s identity. This will be made clear to all parties in advance of the method of data collection. 3.2 Limitations of study When conducting research and collecting data one must consider the limitations of the study as this may provide boundaries and barriers to gaining a representative and accurate piece of work. The researcher will therefore guard against the following: Response rate: limited time and anonymity of respondents may provide barriers to the researcher for following up on people who didnà ¢Ã¢â€š ¬Ã¢â€ž ¢t respond, thus resulting in a low response rate. Scope of information: Companies cherishes their quality management secrets and guiding principles, therefore information on the characteristics of the quality management initiatives may not be divulged. Time: the limited timeframe allotted to conduct this study may constrain the researcher form collecting sufficient comparative data from competitors in an attempt to present a more in-depth comparative analysis. Generalization: due to the nature of the topic and the research objectives, the findings may not be applicable to other organizations. The situation, time and place may be of a different nature. 3.3 RESEARCH TOOLS The researcher will ensure that the tools and resources are available to carry out the research designs. These materials will include: Stationary tools: pens; paper and note pads. Data collection tool: questionnaires and voice recorder. Monetary tools: The researcher will require finances to reach destination to attain data. 3.4 MARGIN OF ERROR: DATA RELIABILITY, VALIDITY AND ACCURACY Reliability and accuracy: McNeil (à ¢Ã¢â€š ¬Ã‹Å"research methodsà ¢Ã¢â€š ¬Ã¢â€ž ¢) defines data as Data reliability therefore, is concerned with ideas such as: 1. The consistency of the data collected 2. The precision with which data is collected 3. The ability to replicate a piece of work. The reliability of data collected will be an important consideration since if data used is not reliable, then the conclusions or findings drawn will be fairly useless. Data reliability will be affected by such things as researcher bias into data collection processes, standardization and interpretation. The inability to record data accurately will cause the data to be less reliable. Validity: Data is only useful if it measures what it is supposed to measure. Validity refers to the extent to which the data collected gives true measurement of social reality.  [7]   When conducting research the concepts of reliability, validity and accuracy go hand in hand. It would be safe to say therefore that if data is reliable but not valid then it may have limited use. Also if data is valid, but not reliable the researcher may not be able to make general statements. In undertaking this research the researcher acknowledges the fact that the research will not be one hundred percent (100%) reliable, valid and accurate. However the researcher will make every attempt to achieve these in an aim to stand against scrutiny. The researcher will conduct the research in a highly professional, ethical and confidential manner. In addition all interpretations and collection of data will be made in an attempt to be unbiased. 4.0 Justification of time plan Essentially projects must conform to set deadline dates. Thus a plan is essential to ensure the successful completion within the timeframe allowed. The dates proposed are expected to conformation however contingencies will assist the researcher in any short comings. These dates are given in medium term expected time span, therefore any additional times required will be attained via slack times gained form other tasks running simultaneously. Therefore undergoing a successful dissertation a timescale becomes necessary to use to gain efficiency and complete the project on time. For the purpose of this study the duration will be six months. The stating date will be June 15th 2010 to December 15th 2010.

Privilege and Democracy :: Racism Race Prejudice Essays

Privilege and Democracy The word and concept, racism, is something that the majority of people in American society fear to talk about or to discuss. Race is a touchy subject and a problem that people try to avoid. If you ask anyone if they consider themselves a racist most likely the answer would be ‘no’. I, as a white Serbian, thought the same thing. However, after reading Beverly Tatum’s â€Å"Defining Racism† in Why Are All the Black Kids Sitting Together in the Cafeteria? and Peggy McIntosh’s article, â€Å"White Privilege and Male Privilege,† I started to re-examine my perception and definition of racism. I wonder how race influences my world as a white, female, heterosexual, and what role it plays in American society. In the first chapter of the book Why Are All the Black Kids Sitting Together in Cafeteria Tatum defines racism as â€Å"racial prejudice† (9). The term racial prejudice is a term that I have heard since I was born. It is the term that the majority of people use in order to describe racism. It is a term that has been introduced to us and it was something that I never questioned. I understood its meaning, but I had never experienced it, until I came to the United States, Middlebury College. At the beginning, I could sense that this country had a history of oppressive racism, but at the same time after living here for two years, I have come to the conclusion that racism is still present. It is hard to understand why, because for me it is so refreshing and rewarding to integrate and live with people of different races. I do not have that opportunity in Serbia, since there, we lack diversity. Tatum asks us to think of racism not only in terms of personal prejudice, but as something larger, that operates as a system of privileges: â€Å"advantages and privileges in a particular society† (9). This idea provides me with a different perspective. Many people of a different race and color are citizens of the United States, but do not have the power or equal opportunity for education or jobs compared to white citizens of this country. Simply being white in the United States opens many doors. By introducing this new way of looking at racism, Tatum sparks many thoughts and I realize that being white is still a great privilege in this sheltered society.

Is War Good or Bad Essay

The ongoing debate, is war good or bad? Usually if we see or hear the word â€Å"war† we think about the negative sides first. There is a saying that a forest fire burns everything in its path and it does destroy the forest but out of the ashes comes new life. War is similar to this. Out of destruction comes a new beginning. A country can benefit from war, by gaining wealth or freedom, increasing in power, and advancing in technology. But the reason why war seems only negative is because there is also destruction where millions of innocent people die, losing their resources and time, and also their money. Not only within the country but the whole world could be affected by war economically and socially. There are plenty of reasons why war is a bad thing. One main thing that comes to us directly and painfully is the death of the loved ones. Wars may solve problems but in the process it kills millions of people so war is cruel. A good example is the WW2, almost 50-60 million people died. Also in a war, the country has to spend a lot of money. It needs to provide weapons like tanks missiles etc., and it needs as many troops as possible. As Chinese strategist Tzu Sun said, â€Å"Where the army is, prices are high; when prices rise the wealth of the people is exhausted† (Tzu Sun, c.400 BCE). For the citizens this is very disappointing because all this money would eventually come from raised taxes and instead this could be spent on poor and uneducated people. As I said, war brings destruction. Inflation is also a problem. For example after the Angola’s Civil War, their currency was so useless that bottles of beer replaced it. Special landmarks, farms, and firms could be dest royed and the country could lose a lot of its resources. After the war, usually the country goes in a huge debt. On the other hand, war could be seen as a positive influence. Wars exist because people cannot agree on something. After the war it could be clear and they would agree and not fight anymore. Sometimes war could give freedom to a country. After war the country could become more powerful. If the war was because of land, after they win they have a bigger country with more resources. These resources could make the economy of the country rocket up. Also war in short-term is actually good for the economy. For example during the Great Depression, unemployment rate decreased. Since they need large amounts of weapons made quickly they hire more people and this leads to more jobs. Long-term wise a war could rebuild the economy of a country. Like the French, their production grew faster after WW1 and WW2. The country develops in technology too. They would need better more powerful strategies and weapons than the enemy’s so they research and develop in technology. Afterwards, this would b enefit the country greatly. Could this debate ever be over? I do not think so. As you can see, there are many bad and good sides of war. Overall I think wars are bad, because all these positive things are still not worth of millions of lives. And the good sides are if you win the war but that is not 100% sure. And even if things are resolved after the war, we are humans and we constantly want more. If the countries do not feel satisfied they might go into a second war and then a third and so on. So I think we should always find more peaceful ways than war.

Plato’s “The allegory of the Cave” Essay

Plato’s â€Å"The allegory of the Cave† addresses so many different areas of philosophy including, epistemology, metaphysics, asceticism, ethics, etc. In his allegory it is important to seek what Plato is trying to accomplish through locating his rhetorical devices, his tone, his position and arguments, in order to develop meaning to his allegory. Plato’s philosophies include education, interaction, individuality, and human nature to make his statement of what the correct path to â€Å"enlightenment† should be, being expressed through symbolism, imagery, themes, and metaphors to convey his message. Plato’s allegory however is actually represents an extended metaphor that is to contrast the way in which we perceive and believe in what is reality. â€Å"The allegory of the Cave† plays multiple roles, all depending how we interpret it, either being used as a metaphor for the process of intellectual understandings on the quest for sense and knowledge, or a way to portray parts of his political philosophy, involving the correct the path to â€Å"the good† and ‘reality’. Plato’s allegory of the cave is a parable to understand the process of how a person becomes enlightened; including the positives and negatives influences it can have on a person in their natural environment, in other words our responses and reaction to being freed from their chains and being forced to experience life outside the cave. Plato’s allegory of the cave presupposes a group of prisoners who have lived chained and uneducated in a cave â€Å"since childhood†. To the back of the prisoners, people cast the shadows on the wall in which the prisoners perceive as reality, questioning â€Å"is it reasonable for the prisoners to†¦In every way believe that the truth is nothing other than the shadows of these artifacts† Although if one were â€Å"released from their bonds and cured of their ignorance† the prisoner would now be confused as to what is real. The thesis behind is the basic tenets that all we perceive are imperfect â€Å"reflections, which subsequently represent truth and reality. This is an important development to the story because it shows us that what we perceive as real from birth is completely false based on our imperfect interpretations of reality and goodness. The importance of the allegory lies in the belief that there are invisible truths lying under the appare nt surface, which can only be obtained through being enlightened, being  Ã¢â‚¬Å"dragged† out of the darkness and seeing the light. Plato’s allegory of the cave shows that society is in a state of ignorance. Though they might be bounded in one position, they accept that it is their natural ‘place in society’. However when one is exposed to the ‘dazzling light’ they begin to see truth through a long, tortuous intellectual journey, discovering a higher realm, true reality and having awareness of goodness. A person who has gained such insight, according to Plato is best equipped to govern in society, having knowledge what is ultimately good, however, will frequently be misunderstood by ‘the other prisoners’ who haven’t obtained intellectual insights. Plato remains convinced that the best rulers, the philosopher-kings, are suited not only because of their education, experience, and wisdom, but also because they would prefer not to rule. More emphatically, nonetheless Plato finds that because of their enlightened minds, the philosopher-king has a duty to rule that t ranscends their personal preference for anonymity. Plato’s ideal society contains the correct functions of politics and motive. He argues that the philosophers, or individuals who have acquired knowledge of virtue and truth, should lead society. Another example is that in his allegory there are malicious individuals who stand in front of a fire as to be able to create shadows which the prisoners perceive as incorrectly reality. They are both aware of a slightly higher level of truth and capable of manipulation of average people’s perception but still unaware of the nature of the forms and of the form of the good. Philosophers should be the ones to lead rather than those who simply have the ability to manipulate the masses. This is because the philosopher is knowledgeable about the forms of the virtues and the good and is more likely to apply them to society. ‘The allegory of the Cave’ is a theory, concerning human perception that can be altered by what is seen and hidden. Plato claimed that knowledge gained through the senses is no more than opinion and in order to have real knowledge, we must gain it through philosophical reasoning. In ‘the allegory of the Cave’, Plato distinguishes between people who mistake sensory knowledge for the truth and compare them to people who actually see. Plato’s allegory revolves around truth and the reflection of truth, as devastating  criticism of our everyday lives as being in bondage to superficialities, to shadows rather than to substance. Both the leaders and the public are ignorant and corrupt, without true knowledge of themselves or the world, motivated by self-gratification. They are chained in slavery to ignorance and passions, to mob hysteria for or against fleeting issues, believing in the illusions, the shadows. We live in a time of loss of meaning, of crumbling values of truth and morality, of corruption in political life and decline in personal integrity. This is our despair. But there is a hope with Plato’s allegory, the hope of ascending to truth and values, even though we might be shunned, we have a grasp of the light.